manualshive.com logo in svg

Phigment Technologies LM-NEX, Instruction Manual

Share
Download
Phigment Technologies LM-NEX Instruction Manual Download Page 9

Copyright Phigment Technologies, 2014 

5 

 

j. 

 

k. 

This lens is now registered and will be recognized as the lens ID specified

 

4.2. 

Define a custom lens id 

The file LENSINFO.DAT contains the lens information. Please use the lens info generator at 

http://www.phigmenttech.ca/lmnex/

 to generate and update lens information. 

 

 

You can load your existing lens file using the “load” button. After this is complete you will need to 
download the adjusted file and copy it onto the adapter to overwrite the LENSINFO.DAT file. 

4.3. 

Using Peripheral illumination correction 

Lenses have the option of defining a peripheral illumination profile. To use the supplied profile (if 
present) set the “profile” option to “1” in CONFIG.TXT. To disable lens profiles, set “profile” to “0”. 

4.4. 

Defining Peripheral illumination correction  

The peripheral illumination correction parameters can be entered via the configuration generator at 

http://www.phigmenttech.ca/lmnex/

 

 

4.5. 

Firmware Upgrade  

Please see instructions that come with the firmware upgrade 
Visit the downloads section at 

http://www.phigmenttech.ca/lmnex/

 for more information.

Summary of Contents for LM-NEX













Reviews:

No comments

Brands by name

Popular brands

Load more brands