background image

23

1072_0_Product_Manual - February 24, 2011 2:52 PM

Upgrade / Factory Reset

Go

 - This will boot the SBC into the Recovery/Upgrade system. See the Recovery/Upgrade section below for more 

information.

System: Packages

This is where package updates are performed. From time to time, updates will be made available. These will address 

bugs and security issues, add new features, and update the phidget21 library and webservice.
There are also some other package management options available.
Note that this page can take quite a long time to load when “Include full Debian Package Repository” is enabled.

Upgradable Packages

This lists all available package updates, if any.

Upgrade All Packages

 - This installs all available package updates. Selective updating can only be done via SSH.

Refresh Available Packages

 - This runs ‘apt-get update’ to refresh the package list and check for new updates.

Installable Packages

This lists some package sets that be installed to add common features to the SBC. Before installing these package 

sets, enable “Include full Debian Package Repository”, and “Refresh available packages” - otherwise the needed 

packages won’t be available and the install will fail.

Java Support

 - This installs ‘libphidget21-java’ and ‘default-jre-headless’ to support Java based projects.

C/C++ Development Tools/Headers

 - This installs ‘build-essential’ which allows for on-board development in C/C++.

Settings

Include full Debian Package Repository

 - This enables the full Debian repository in the apt sources list. By default, 

only the Phidgets repository is included. When enabled, all system packages will show up in the updates list, rather 

then just Phidgets packages, allowing for full system updates. This also allows the user to install any packages they 
like, from the SSH interface.

System: Reboot

The board can be rebooted remotely from this page. The reboot should take 45-60 seconds depending on network 

conditions. It tries to shut down all running programs before restarting as opposed to the reset button.

Main: About

The license information and credits for the configuration interface is displayed here. A link is provided to the original 

sources and the Phidgets web site.

Summary of Contents for 1072
















































Reviews: