6
1002_0_Product_Manual - March 2, 2011 9:59 AM
Connect your device to the PhidgetAnalog
1.
board using one of the terminal blocks.
Connect the PhidgetAnalog 4-Output to
2.
your computer using the Mini-USB cable.
1
2
Getting Started
Checking the Contents
You should have received:
A PhidgetAnalog 4-Output
•
A Mini-USB cable
•
A Hardware Mounting Kit
•
Connecting all the pieces
Testing Using Windows 2000/XP/Vista/7
Downloading the Phidgets drivers
Make sure that you have the current version of the Phidget library installed on your PC. If you don’t, do the
following:
Go to www.phidgets.com >> Drivers
Download and run Phidget21 Installer (32-bit, or 64-bit, depending on your PC)
You should see the
icon on the right hand corner of the Task Bar.
Running Phidgets Sample Program
Double clicking on the
icon loads the Phidget Control Panel; we will use this program to make sure that your
new Phidget works properly.
In order to test your new Phidget you will also
need:
A device requiring a 0 to 10V signal
•
A multimeter could also be used to monitor the output voltage
•
The source code for the Analog-full sample program can be found under C# by clicking on www.phidgets.com >>
Programming.
