PHICOMM FD-221 User Manual Download | Manualshive

Page: 48 / 61

background image

ADSL2/2+ Modem Router

www.phicomm.com

43

Chapter 4: Software Configuration

Firmware

Make sure the firmware or romfile you want to use is on the local hard drive of the computer.
Click Browse to find the local hard drive and locate the firmware or romfile to be used for
upgrade.

To upgrade the router's firmware:

Step 1: Download a more recent firmware upgrade file.

Step 2: Type the path and file name of the update file into the ‘New Firmware Location’ field. Or
click Browse to locate the update file.

Step 3: Click UPGRADE.

Note:



New firmware versions are posted at www.phicomm.com and can be downloaded for
free. If the router is not experiencing difficulties, there is no need to download a more
recent firmware version, unless the version has a new feature that you want to use.



When you upgrade the router's firmware, you may lose its current configurations, so
please back up the router’s current settings before you upgrade its firmware.



Do not turn off the router or press the Reset button while the firmware is being
upgraded.



The router will reboot after the upgrade has been finished.

«
...
46
47
48
49
50
...
»

Summary of Contents for FD-221






























































Reviews:

No comments

Related manuals for FD-221

Brand: Observint Pages: 11

Brand: Garland Pages: 4

Brand: Qlogic Pages: 2

Brand: Qlogic Pages: 172

SMART NODE 4950-NCE

Brand: Patton electronics Pages: 8

NetLink 2960 RAS

Brand: Patton electronics Pages: 2

Brand: Patton electronics Pages: 2

Brand: Qlogic Pages: 20

ER3-100 (5K02-55)

Brand: 8e6 Technologies Pages: 74

Brand: Abocom Pages: 1

Brand: Toto Link Pages: 55

Brand: Supermicro Pages: 27

Ether-GSH24T v3

Brand: AirLive Pages: 2

Brand: LevelOne Pages: 2

Brand: National Instruments Pages: 147

Brand: ICP DAS USA Pages: 8

Brand: Fibrain Pages: 20

Brand: Edimax Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands