Phicom FWR-714U, User Manual, Page: 31 / 94

300Mbps Wireless N NAS Rout
www.phicomm.com
25
Chapter 3: Router Configuration
change the wireless channel if you notice interference problems with another nearby
access point, or the wireless performance is not as good as you expected.
SSID Broadcast: If you choose Enabled, the wireless router will broadcast its name (SSID) .
BSSID: The physical address of the router.
Channel Bandwidth: The bandwidth of the wireless channel, you can select 20MHz or
20/40MHz.
Wireless Security Settings
You can configure the security of your wireless network in this page. There are six wireless
security modes supported by this router: Open, Shared, WEPAUTO, WPA-Personal,
WPA2-Personal, and WPA- Personal / WPA2-Personal.
Security Mode: You can choose Disable, Open, Shared, WEPAUTO, WPA-Personal,
WPA2-Personal, WPA- Personal/ WPA2-Personal.
Mode 1: Security Mode > Disable
If you do not want to use wireless security, highlight on this option. That means other
people can connect to your wireless network without entering any password, so it may slow
down your internet speed, it’s recommended strongly to choose one of the following
modes to enable security.