background image

Figure 25

 

 

Yellow

Yellow

Light Blue

Light Blue

Blue

Blue

Good

Bad

Observe Flame Height When Lit: The burner will display blue and yellow flames. These flames should be a blue / yellow color between 
1~2 in. height, (see Figure 25). These flames should not be yellow or produce thick smoke. This would indicate an obstruction of airflow 
through the burners. The flames should be blue with straight yellow tops.

CARE AND MAINTENANCE

  

OPERATION INSTRUCTIONS

NOTE: 

Always allow fire pit to cool COMPLETELY before you cover the fire pit  with an outdoor weather cover or you
attempt the service or maintenance.
Always dry the product completely before it is covered or stored into the garage.

 

15

To enjoy the outstanding performance from your fire pit, make sure you perform the following activities on a regular basis:
1. Use warm soapy water for cleaning. Never use flammable or corrosive cleaning agents. 
2. Remove dirt, spills or stains on the product quickly. 
3. Dry the product with a soft cloth or paper towel.
4. Do not use sharp tools to scratch the product.
5. While cleaning the fire pit, make sure to keep the area around the burner dry at all times. DO NOT submerge the control valve 
assembly. If the gas control is submerge in water, DO NOT use it. It must be replaced.
6. Air flow must be unobstructed. Keep controls, burner, and circulating air passageways clean. Signs of possible blockage include:
    (1). Gas odor with extreme yellow tipping of flame.
    (2). Fire pit does NOT reach the desired temperature.
    (3). Fire pit flame is excessively uneven.
    (4). Fire pit makes popping noises.
    (5). Spiders and insects can nest in burner or orifice. This dangerous condition can damage fire pit and render it unsafe for use. 
Clean burner holes by using a heavy-duty pipe clearer. Compressed air may help clear away small particles. 
7. Carbon deposits may create a fire hazard. Clean burner with warm soapy water 
    if any carbon deposits develop.
8. Cover your fire pit with an outdoor weather cover when not in use to protect it  from the elements.

LIFE GETS BETTER WITH PHI VILLA

Summary of Contents for THD-E049-01
























Reviews: