pilot box
A
B
Figure 5
Figure 6
1. Make sure the valve connections are securely fastened to the burner and the cylinder.
2. Visually check the connection between the burner/venturi tube and orifice.
3. Make sure the burner/venturi tube fits over the orifice.
4. Please refer to diagram for proper installation (See Figure 6).
5. If the burner/venturi tube does not rest flush to the orifice as shown, please contact us
for assistance.
Burner connections
6. Place the lava rocks (B) into the fire pit body (A). Approx 1.1 lbs of lava rocks are needed (See Figure 5) .
1.
2.
ASSEMBLY INSTRUCTIONS
8
NOTE:
Leave the pilot box uncovered by lava rocks.
CAUTION
This fire pit is equipped with natural lava rock that may crackle or pop the first time it is used. Lava rock has been
pre-heat treated. How ever, in rare cases on first time use, lava rock may pop or burst causing small pieces of hot
rock to fly out of the fire pit. These hot pieces could strike somebody's face during the process of lighting the fire
pit, stay away from the fire pit for the first 20 minutes after igniting.
WARNING
Before using this outdoor firepit, make sure you have read, understand and are following all information provided in
the “Safety Information” section beginning on page 2 and 3. Failure to follow those instructions can cause death,
serious injury or property damage.
WARNING
Keep children away during assembly, as this item contains lava rocks, which are small pieces and can be swallowed
by children.
OPERATING INSTRUCTIONS
Checking for leaks
LIFE GETS BETTER WITH PHI VILLA
