PHI VILLA E02GF-039-BU, Use And Care Manual

Page: 30 / 32

OPERATION INSTRUCTIONS
11
Observe Flame Height When Lit: The burner will display blue and yellow flames. These flames should be a blue / yellow color between
1~2 in. height, (see Figure 18). These flames should not be yellow or produce thick smoke. This would indicate an obstruction of
airflow through the burners. The flames should be blue with straight yellow tops.
Figure 18
Yellow
Yellow
Light Blue
Light Blue
Blue
Blue
Good Bad
Figure 17
Lighting Instructions
1. Push in gas control knob slightly and turn to “OFF”.
2. Turn gas control knob to “ON/MIN”.
3. Push in gas control knob all the way and hold. Continue to press the ignition button for 15 seconds.
4. If the burner does not light in 15 seconds, release the knob and it will pop back out. Wait 5 minutes before attempting to light the
burner again and repeat step 1 to 3.
To turn off gas
1. Push in gas control knob slightly and turn to “OFF”.
WARNING:
For your safety, read and follow the Lighting Instructions in this manual and in the Rating Plate on
the appliance. IMPROPER LIGHTING PROCEDURES COULD RESULT IN A FIRE HAZARD OR EXPLOSION
HAZARD OR PROPERTY DAMAGE, INJURY OR LOSS OF LIFE.
1 AAA
1.5V
IGNITOR
(Encendedor)
MAX
(MÁX.)
OFF
(APG.)
ON/MIN
(ENC./MÍN.)
gas control knob ignition button
LIFE GETS BETTER WITH PHI VILLA