Operation with The Control Panel
The controls are located at the front lower side of your heater.
: Press this button to turn ON the fireplace. The unit will beep. Press again to
turn off the fireplace and the fan will continue to work for 60 seconds without
heat.
: Press this button to change flame color. The unit will beep. Press once is
orange color. Press twice is orange and blue color. Press third is blue color.
: Press this button to change flame effect. The unit will beep. Press again to
decrease the flame intensity. There are 6 light intensities for your selection.
The flame optics will go lower under the sequence of 6,5,4,3,2 and 1. Pressing the
button again will stop the flame effect.
: Press this button to set the temperature. The unit will beep. Press this button to
the desired temperature. When desired ambient temperature is reached, the
heater will automatically stop heating. When the ambient temperature drops below the
desired temperature 2°C, the heater will resume heating.
Operation by The Remote Control
: Press this button to turn ON the fireplace. The unit will
beep. Press again to turn off the fireplace and the fan will
continue to work for 60 seconds without heat.
: Press this button to toggle between the two temperature
scales. The corresponding Celsius (C) or Fahrenheit (F)
LED indicates the current setting.
: Press this button for timer function. The letters '0H' to '8H'
will appear on the LED screen. '0H' means there is no set
running time and heater will run continuously. The letters '1H' to
'8H' mean the number of hours that the heater will operate before
shutting off.
: Press this button to change flame effect. The unit will beep. Press again to
decrease the flame intensity. There are 6 light intensities for your selection. The
flame optics will go lower under the sequence of 6,5,4,3,2 and 1. Pressing the
button again will stop the flame effect. By default, the flame color is orange. Hold it for
about 3 seconds to change flame color. The flame color will change under the
