Fig. C
Type 2. Wall Hanging
Step 1: Select the wall location where you want to hang your electric heater. Draw a
horizontal line using a level and mark 4 drill holes for the 4 anchor screws.
Note: The holes are for mounting of heater and it shall be level so that the heater can
be mounted properly and leveled.
Step 2: Drill 4 holes 8 mm (5/16in) in diameter and 43 mm (1.7in) deep on the marked
locations. For holes that do not hit stud, use the supplied wall anchor. Install the wall
anchors into the holes and gently tap them into place with a hammer until the flange of
the wall anchor is flush with the wall surface. See Fig. B.
Step 3: Secure the mounting bracket to the wall anchors using the 4 anchor screws
and 4 washers as shown in Fig. C.
