9
Operating Instructions
Once the electric heater has been properly installed and connected to a ground
electrical outlet, it is ready to operate.
Notes:
Ensure the circuit breakers for the power supply are turned on.
This machine uses remote control and touch screen to control the work of the
product.
During remote control and touch operation, the buzzer will beep once for each
effective operation.
The backlight of the touch screen is off, and the first operation of remote control or
touch is only to wake up the system, and the machine can be operated effectively
in the system wake-up state.
The temperature setting of this machine can only be adjusted between 50→77
Fahrenheit, and the whole process can be heated according to the user's set
temperature.
Main power switch:
The power switch on the upper part of the machine is
closed, the buzzer beeps, and the backlight of the touch screen lights up once,
and the system enters the standby state; the switch is opened, that is, the main
power supply is cut off.
Control Panel Operation
The power switch located on the top right hand side of the product must be first switch on.
Press once the button to turn the fire and flame effect on. An orange indicator light will
appear to indicate the function is ON.
Press once the button for the low heat settings; press twice to switch the heat setting off.
Press once the button for the high heat settings; press twice to switch the heat setting off.
