8
Manually select frequency.
For manual selection feature, press SET button until Group number next to "GP"
flashes, then press UP or DOWN button to select desired group number. Press
SET button to confirm. Press SET button again until the channel number next to
"CH" flashes, press UP or DOWN button to select desired channel number.
Phenyx Pro recommends using the auto scan function for optimal operating
results.
Auto scan for frequency.
Short press the SET button a couple times until "AUT-CH" is shown on the LCD
screen. Press the UP button to confirm the setting. The system will automatically
select the least-interference best signal channel.
Squelch level function.
Short press the SET button a couple times until “SQL--1” is shown on the LCS
screen. Press the UP or DOWN button to change the levels. Press the SET button
to confirm.
Lock function.
Short press the SET button a couple times until “LOC” is shown on the LCS
screen. Press the UP or DOWN button to lock or unlock the receiver channel.
The receiver antennas should be kept away from any metal surface.
Before inserting the batteries, please make sure that they are inserted according
to the correct polarity.
For better results, keep the transmitters at least 2' away from the receiver but
within the transmitter's range (328ft). Keep the transmitters in a direct line of sight
of the receiver whenever possible.
Electronics devices such as mobile phones, radios, and other transmitting devices
may interfere with the wireless system transmitters. Please keep transmitter and
receiver away from those devices and other possible interfering sources.
1-
2-
3-
4-
1-
2-
3-
4-
B.Functions
Tips
