INSTALLATION
WWW.PHENIXLIGHTING.COM
2/4
OUTSIDE THE LUMINAIRE
INSIDE THE LUMINAIRE
184
600
/3
LED test switch
CAUTION: MAKE CERTAIN THE AC POWER IS OFF AND THE 184600/3 UNIT CONNECTOR IS
DISCONNECTED UNTIL THE INSTALLATION IS COMPLETE.
1. SPECIFICATION OF 184600/3
2. INSTALLING THE 184600/3
The 184600/3 can be mounted inside or outside (nearby or on top of) the luminaire.
3. INSTALLING THE LED TEST SWITCH (LTS)
Select a convenient location for the LTS so that it can be seen after installation.
Drill a 1/2"(12 mm) hole for mounting the LTS. Connect the wires from LTS to the
184600/3 model according to the wiring diagram on page 3.
All dimensions are typical
OUTSIDE THE LUMINAIRE
1846
00/3
One 7/8" (22mm) hole for
conduit connector for 184600/3
Dimension unit: mm [inch]
Tolerance: ±1 [0.04]
184600
184603
Output
Output Power
Voltage
Model
Input
230V/50Hz
120V/60Hz
277V/60Hz
230V/50Hz
120V/60Hz
277V/60Hz
184600 Max. 36W
184603 Max. 27W
With dimmable or
non-dimmable load
