3
2
6. OPERATION CONTROLS AND FUNCTIONS
The following sections describe the hardware components of the unit.
6.1 Front Panel
1 2
POWER
SYNC
CLUX-16EN 1x16 SPLITTER
1
POWER LED
The power LED will illuminate when power on.
2
SYNC LED
The LED will illuminate when the HDMI source signal is connected
to the input port.
3
6.2 Rear Panel
1 2 3
4
5
DC 5V
SERVICE
2
1
4
3
6
5
8
7
10
9
12
11
14
13
15
STD
TV
INPUT
OUTPUT
EDID
16
1
EDID STD/TV
Default factory setting is TV, leave as it is if the display is properly.
Switch to STD to use build-in EDID if the display has problems. When
the EDID control switch in TV selection, the unit will detect the fi rst
HDMI output source’s EDID and record in the unit.
Note:
This function is not available in 1 by 2’s model
2
SERVICE
This slot is to connect with mini USB B type cable for fi rmware
update only.
3
HDMI INPUT
Connect input port to the HDMI or DVI output of your source
equipment such as DVD player or set-top-box.
4
HDMI OUTPUT
Connect the output ports to the HDMI display. When more than
one output connected, the HDMI outputs play identical video
signal simultaneously.
5
DC 5V
Plug the 5V DC power supply into the splitter and connect the
adaptor to AC wall outlet.
