7
CAUTION
- Power supply, re-start, moving, service call -
This unit must be plugged into a dedicated circuit protected by branch circuit
breaker.
Use a dedicated power source as indicated on the rating label attached to the
unit.
A multiple-tap may cause fire resulting from abnormal heating.
Connect the power supply plug to the power source firmly after removing the
dust on the plug.
A dusty plug or improper insertion may cause a heat or ignition.
Never store corrosive substances such as acids or alkalis in the unit except in a
sealed container.
These may be detrimental to health and may cause corrosion of internal
components, cooling circuit or electrical components.
Check the setting when starting up of operation after power failure or turning off
of power switch.
The stored items may be damaged due to the change of setting.
When moving the unit, contact our sales representative or agent.
The moving by a user may cause damage or injury resulting from tipping over of the
unit.
Prepare a safety check sheet when you request any repair or maintenance for
the safety of service personnel.
Copy the “Safety check sheet” and hand it to service personnel after filling the sheet.
