Phcbi MDF-1156 Series, Operating Instructions Manual

Page: 31 / 36

29
SPECIFICATIONS
Product name Ultra-Low Temperature Freezer
MDF-1156
Ultra-Low Temperature Freezer
MDF-1156ATN
External dimensions W1400 mm x D800 mm x H945 mm
Internal dimensions W500 mm x D450 mm x H572 mm
Effective capacity 128 L
Exterior Painted steel
Interior Aluminum plate
Door Painted steel
Insulation Rigid polyurethane foamed-in place
Compressor Hermetic type, 1100 W x 2
Condenser Fin and tube type (high stage side), Shell and tube type (low stage side)
Evaporator Tube on sheet type
Refrigerant R-407D (high stage side), HFC mixed refrigerant (low stage side)
Temperature controller Microprocessor control system
Temperature display Digital display
Sensor Platinum resistance (Pt 100 Ω )
Alarm buzzer, lamp, remote alarm contact
Battery
For power failure alarm; Nickel-metal-hydride battery, DC 6 V, 650 mAh, Auto-recharge
For backup cooling kit; Lead storage battery, DC 6 V, 4 Ah
Temperature recorder -----
Dry cell driven
Recording chart (for 2 months)
Backup cooling kit ----- Liquid N
2
Accessories
1 set of key, 2 rubber caps, 1 inner lid, 1 scraper
-----
6 recording paper, 1 dry cell
2 ink pens (cartridge)
1 connect tube for backup cooling kit
Weight 265 kg 272 kg
Option Storage case (MDF-49SC)
Note : Design or specifications will be subject to change without notice.
The battery for power failure alarm is an article for consumption. It is recommended that the
battery will be replaced about every 3 years. Contact our sales representative or agent at the time
of replacement of the battery for recycling.
Refer to the updated catalog when ordering an optional component.