Phason
Natural Ventilation Control
33440000
3
Becoming familiar with the NVC
Main display
The main display shows the temperature and any alarm messages. The main display is what you see
when you are not in a menu or settings display.
Here are some things to know about the main display.
When a relay is on, the status LED for that relay is lit.
When there is an alarm condition, the display flashes between the alarm message and the current
temperature. For more information about alarms, read
Alarm settings and conditions
on page
13.
When the control is in manual override mode:
For the curtain
, the
Open
and
Close
LEDs will blink three times and then stay off for one
second.
For the heater
, if the heater is ON, the
Heat
LED will blink three times and then stay ON
for one second; if the heater is OFF, the LED will blink three times and then stay OFF for
one second.
For more information, read
Using manual override mode
on page 16
Down
▪
Scroll down
▪
Decrease a value
Up
▪
Scroll up
▪
Increase a value
Select
▪
Select an option
▪
Accept a value
Back
▪
Go back
▪
Cancel changes
Alarm LED
▪
Shows when there is an alarm condition
Test LED
▪
Shows when test mode is active
Version LED
▪
Shows the firmware version
Programming LEDs
▪
Show which setting is being
displayed
or
programmed
Status LEDs
▪
Show the status of the relays
▪
Show which relay is being
controlled
Programming LEDs
▪
Show which setting is being
displayed or programmed
