Phasemation EA-2000 Owner'S Manual Download Page 4

4

Safety Instructions

Before starting 

to use

In this owner’s manual and on the product, various pictures are used 

to show our customers how to use Phasemation EA-2000 safely and 

properly in order to avoid the loss of our customer’s assets and to 

protect our customers from harm. 

SAFETY PRECAUTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). 

NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE 

PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert 

the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure 

that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the 

presence of important operating and maintenance (servicing) instructions in the literature 

accompanying the appliance.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS 

APPLIANCE TO RAIN OR MOISTURE.

DECLARATION OF CONFORMITY

We declare under our sole responsibility that this product, to which this declaration relates,

is in conformity with the following  standards:
EN60065, EN55032, EN55020, EN61000-3-2 and EN61000-3-3.

Following the provisions of Low Voltage Directive 2014/35/EU and EMC Directive 2014/30/EU

IMPORTANT SAFETY  INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings.

Install in accordance with the manufacturer’s instructions. 

8.

 not  install  near any heat sources  such  as radiators,  heat registers,  stoves,  or other  apparatus (including amplifiers)

that produce heat.

9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the 

point where they exit from the apparatus.

10.

 use attachments/accessories

by the manufacturer.

11. Use only with  the cart, stand,  tripod,  bracket,  or table specified

specified

by  the  manufacturer, or sold with

the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to 

avoid injury from tip-over.

12. Unplug this apparatus during lightning storms or when unused for long periods of time.
13.

 all servicing to

service

qualified

 personnel.  Servicing  is required  when  the apparatus has

been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled 

or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate 

normally, or has been dropped.

14.

Do

Only

Refer

Batteries  shall not  be exposed  to excessive  heat such  as sunshine,

or the

fire

like.

Summary of Contents for EA-2000















Reviews: