Phase Research 2000 Series Drive-Thru Timer System 2+2/386, User Manual

Page: 86 / 131

SECTION 13 - PARAMETERS PROGRAMMING 13-18
PHASE RESEARCH
USER GUIDE
4. Press or to select the report option. The Timer displays an X for
each selection.
5. Press to move the cursor to REPORT.
6. Press to move the cursor to [@] immediately to the right of REPORT.
7. Press or to select one of two options: a specified time (time=)
or a specified time increment after store closing (close+).
8. Press to move the cursor to either [=] or [+] depending on your choice
in the previous step.
9. Press or to set the time for printing the automatic reports.
NOTE: You can turn the following features
–
HEADER, TARGET, PEC, AUTO
–
ON
or OFF.
10. Press to move cursor immediately to the right of PULLOUT.
11. Press or to select ON or OFF.
12. Press to move cursor to the right of FTe (Fulltime Event).
13. Press or to select ON (to print any events in the Timer) or OFF.
14. Press to move cursor to the right of HEADER.
15. Press or to select ON (to print a Report Header on each report)
or OFF.
16. Press to move cursor to the right of PEC (Print Each Car).