Operating
Instructions
&
Parts
Manual
Horizontal
Rotary
Tables
Dividing
Plates
Pg.
9
Dividing Plate Chart Revision (08/2007)
The dividing chart shown in the original operation manual was found to have a few minor
errors. The charts on the following pages will rectify any errors shown previously as well as
give 100% coverage of every possible division using the standard dividing plate set.
As you will see from the charts, there are many division numbers that have more than one
combination. As an example, any plate could be used for an index of 4,8,12,20 and 36 equal
spaces.
On page 3 of the original manual, the statement “
and all divisible by 2,3 and 5 from 67-132
equal
divisions
” SHOULD READ “
and all divisible by 2,3 or 5 from 68-130 and some but not
all
divisible by 2,3 or 5 from 132-5760 equal divisions.
The divisions of 67 and 131 are not
available with the hole circles provided. The only divisions divisible by 2,3 and 5 are 30, 60, 90
and so on.
On page 6-of the original manual, reference No. 2 reads “
Dividing plate with 46-53 and 54-66
holes
” SHOULD READ
“Dividing plate with 46-53and 54-64 holes”.
Plate identification:
Plate A is having 34, 37, 38, 39 and 41 holes
Plate B is having 43, 44, 50, 52, 56 and 61 holes
Plate C is having 46, 47, 49, 51 and 53 holes
Plate D is having 54, 57, 58, 59, 62 and 64 holes.
