phase II+ 220-006, Operating Instructions & Parts Manual

Page: 12 / 13

21 Industrial Ave

Upper Saddle River, NJ. 07458
Tel: (201)962 ‐ 7373

Fax: (201)962 ‐ 8353
E ‐ Mail: info@phase2plus.com
Web Site: http://www.phase2plus.com
Rotary Table/Lathe Chuck Adapter Plates
+
Table
 221 ‐ 304 221 ‐ 306
220 ‐ 006
221 ‐ 308
220 ‐ 008
221 ‐ 310
220 ‐ 010
221 ‐ 312
220 ‐ 012
221 ‐ 316
Size 4” Table 6” Table 8” Table 10” Table 12” Table 16” Table
Plate 221‐354 221‐356 221‐358 221‐360 221‐362 221‐366
Lathe
Chuck
559‐110
3”
559‐112
5”
559‐113
6”
559‐114
8” 559‐115
10”
559‐116
12”
4” Rotary Table / 4” Adapter Plate / 3” Lathe Chuck
6” Rotary Table / 6” Adapter Plate / 5” Lathe Chuck
8” Rotary Table / 8” Adapter Plate / 6” Lathe Chuck
10” Rotary Table / 10” Adapter Plate / 8” Lathe Chuck
12” Rotary Table / 12” Adapter Plate / 10” Lathe Chuck
16” Rotary Table / 16” Adapter Plate / 12” Lathe Chuck
Mounting Instructions:
Make sure the “step” on the adapter plate goes to the back side of the
lathe chuck.
Connect using mounting bolts that are supplied with the lathe chuck.
Carefully place the plate/chuck assembly on the rotary table face plate
and line up the holes in the adapter plate with the T‐slots on the rotary
table. Connect using the T‐nuts and bolts that are supplied with the
adapter plate.
Center the plate and tighten bolts.
+
=