PHANTOS M6WB
EN
Some general information on DMX:
•
The DMX-protocol is a widely used high speed signal to control intelligent light
equipment. You need to
“daisy chain” your DMX controller and all the connected units with a balanced
cable of good quality.
•
Both XLR-3pin and XLR-5pin connectors are used, however XLR-3pin is more
popular because these cables are compatible with balanced audio cables.
•
Pin layout XLR-3pin: Pin1 = GND ~ Pin2 = Negative signal (-)
~ Pin3 = Positive signal (+)
•
Pin layout XLR-5pin: Pin1 = GND ~ Pin2 = Negative signal (-) ~ Pin3 =
Positive
signal (+) ~ Pins4+5 not used.
•
To prevent strange behavior of the light effects, due to interferences, you must
use
a 90
Ω
to 120
Ω
terminator at the end of the chain. Never use Y-splitter cables,
this simply won’t work!
•
Make sure that all units are connected to the mains.
•
Each light effect in the chain needs to have its proper starting address so it
knows which commands from the controller it has to decode.
DMX 10 CH MODEL:
DMX CHANNEL
VALUE
FUNCTION
REMARKS
1
0-255
Master-Dimmer
2
0-255
Strobe
3
0-255
RED
Color
for
SMD 5050 leds
4
0-255
Green
Color
for
SMD 5050 leds
5
0-255
Blue
Color
for
SMD 5050 leds
6
0-255
Cree 3W LEDS
7
0-255
Build-In effects for
1-15
8
0-255
Build-in effects for
When value is on
16-30
255,It will running
automatically
9
0-255
Speed for build-in
From Slow to Fast
effects
10
0-255
Sound control
Sensitivity 0-100
Ps:This is the basic model which is so easy for people to control
，
to have
some good effects.
PHANTOS M6WB
EN
