PHANTOS M6WB
EN
MAINTENANCE
• Make sure the area below the installation place is free from unwanted persons
during servicing.
• Switch off the unit, unplug the mains cable and wait until the unit has been cooled
down.
During inspection the following points should be checked:
• All screws used for installing the device and any of its parts should be tightly
fastened and may not be corroded.
• Housings, fixations and installations spots (ceiling, truss, suspensions) should be
totally free from any deformation.
• When an optical lens is visibly damaged due to cracks or deep scratches, it must
be replaced.
• The mains cables must be in impeccable condition and should be replaced
immediately when even a small problem is detected.
• In order to protect the device from overheat the cooling fans (if any) and ventilation
openings should be cleaned monthly.
• The interior of the device should be cleaned annually using a vacuum cleaner or
air-jet.
• The cleaning of internal and external optical lenses and/or mirrors must be carried
out periodically to optimize light output. Cleaning frequency depends on the
environment in which the fixture operates: damp, smoky or particularly dirty
surroundings can cause greater accumulation of dirt on the unit’s optics.
• Clean with a soft cloth using normal glass cleaning products.
• Always dry the parts carefully.
Attention: We strongly recommend internal cleaning to be carried out by
qualified personnel!
PHANTOS M6WB
EN
