4/11
©
PHANTOS
®
Distributed in Australia by PHANTOS www.phantos.com.au
2.2.1 Line Termination
In DMX Mode, at the last fixture in the chain, the DMX output has to be
connected with a DMX terminator. This prevents electrical noise from
disturbing and corrupting the DMX control signals. The DMX terminator is
simply an XLR connector with a 120
(ohm) resistor connected across pins 2
and 3, which is then plugged into the output socket on the last projector in
the chain. The connections are illustrated below.
2.3 AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
Warning!!! All fixtures must be connected to circuits with a
suitable Earth Ground.
5/11
©
PHANTOS
®
Distributed in Australia by PHANTOS www.phantos.com.au
3 OPERATION INSTRUCTIONS
3.1 Menu Map
Display
Function
A001-A512
DMX Address
ADye-ADno
DMX Mode Priority (ADye for Yes, ADno for NO)
SOND
Sound Mode
F000-F255
Strobe speed slow to fast
R000-R255
White Dimmer
G000-G255
Amber Dimmer
3.2 DMX Mode
In DMX mode, you can control the fixture with a DMX controller.
1. Press
MENU
button until display reads
: “ Axxx ” for DMX mode.
2. Then press ENTER button and use Up/Down button to set DMX address for the
fixture.
DMX Protocol:
10CH
DMX
Function
Ch1
0-255
Master dimmer
Ch2
0-255
White dimmer
CH3
0-255
Amber dimmer
CH4
0-255
Master strobe
