a.
Sample number alarm:
Lack of Sample indicator will turn on if the total weight of sample is below
the limit value, by adding the sample piece with counting until the indicator
is turned off. Then set the new numbers of sample through numeric key then
press
[ SAMPLE/UNIT ]
key.
FREE SAMPLE FUNCTION
is the same as the above; scale will
automatically adjust and calculate new average unit weight if operator add
samples in slowly with the numbers.
FREE SAMPLE FUNCTION
will not work if the displayed numbers
exceed 1,000,000 pieces.
b.
Unit weight alarm:
Lack of Piece Weight indicator will turn on if the averaged unit weight or set
unit weight is not enough for accurate counting operation. Operator may use
scale even this indicator turn on, but counting error might occur.
c.
Alarming by press [QTY/SET]:
THE SCALE has useful check function to inform operator that the total piece
counts quantity has reached the lower limit and the upper limit desired. This
function is designed for packing purpose. For example, if the operator wish
to count 1,000 pieces for every package, he can set the lower limit and the
upper limit as 1,000 pieces as following: (1)press
[QTY/SET]
enter quantity
alarm menu. (2) Setting quantity alarm: repeat step(1), enter quantity alarm
menu, press
[ZERO]
key to selected, selected “CH=on”, this means quantity
alarm is turn on. If selected “CH=off”, this means quantity alarm is turn off.
(3) Setting lower limited and upper limit: repeat step (1), enter quantity
alarm menu, presses
[TARE]
key to selected. when the display will show
“L=0000”(L for flash), press digital key, input “990” then press
[TARE]
key
again, input lower limit is complete. The display will show “H=0000”(H for
flash), press digital key, input “1010” then press
[TARE]
key again, input
upper limit is complete. (4) exit the quantity alarm menu: press
[QTY/SET]
key to exit the quantity alarm menu.
Ⅳ
. Function setting.
1.
Turn off the scale.
2.
press and keep
[UNIT WEIGHT]
key then turn on the scale, the display
will show-----and then b=ON/OFF on the first line, A-XX on the second
line
3
and L=ON/OFF on the third line. Press
[QTY/SET]
to select activate or
inactivate the function of the beep. Press
[TARE]
to select auto off time. Press
[ZERO]
key to select activate or inactivate the function of the backlight..
3.
UNIT WEIGHT function: when there is no weights on the platform, press
[SAMPLE/UNIT]
key to select the unit(kg or lb). When there is something on
the platform, press
[UNIT WEIGHT
] key to sample.
unit weight memory
1.
Turn on the scale
2.
Press 0 to 9 to input the unit weight you want to save.
3.
Press
[STORE]
to confirm the unit weight and then the display will show
“c xxx” .
4.
Press M1 to M9 within 2 seconds, the third line of the display will show “
-
- - -
”.
Unit weight transfer
1.
Press
[CE]
to clear the memory, the second line of the display will show 0.
2.
Press M1 to M9 to transfer the unit weight from memory.
Total weight clear
1.
Press [
TOTAL]
to show total pieces on the third line of the display.
2.
Press [
MC]
to show the unit which will be cleared.
3. Press
[CE]
to confirm clear.
4
WWW.PHANTOMSCALES.COM