Phanteks ENTHOO ELITE, User Manual

Page: 19 / 44

17
ENTHOO ELITE
C O N N E C T I N G P W M H U B
The “Fan 1” connector should always be connected to a fan. The
motherboard will read the RPM signal from this fan and all other
fans will be regulated according to FAN 1. Y-splitters should not be
connected to FAN 1.
1.
2.
3.
C O N N E C T T H E 4 - P I N C A B L E T O T H E
M O T H E R B O A R D P W M F A N H E A D E R
C O N N E C T Y O U R F A N S T O T H E
P W M H U B
C O N N E C T T H E 1 2 V S A T A C A B L E T O
T H E P O W E R S U P P L Y
Not all 4-pin fan headers on a motherboard provides true PWM
signal. Please consult the motherboard manual for the correct fan
header.
Please connect the 12V SATA cable if your motherboard 4-pin PWM
fan header is providing insufficient power to the PWM hub.