Phaesun GmbH
· Brühlweg 9 · 87700 Memmingen · Germany · T49 (8331) 990 42 - 0 · T49 (8331) 990 42 - 12 · [email protected] ·
www.phaesun.com
Warning:
If the supply cord is damaged, it must be
replaced by the manufacturer or its service agent
or similar qualified person in order to avoid a
hazard. Be sure to shut off electric supply at
main switch or circuit breaker before installation.
The important safeguards and instruction
appearing in this manual are not meant to cover
all possible conditions and situation that may
occur. It must be understood that common
sense, caution and care are factors which cannot
be built into any product. These factors must be
supplied by the personcaring for and operating
the until.
No responsibility will be accepted for any
damage which may occur during transport or by
improper installation or voltage fluctuation or if
any portion of the product has been altered or
modified.
Instruction for installing DC-TABLE FAN
CAUTION
1. Improper installation may result in the risk of
fire, electric shock, or injury to persons.
2. To prevent risk of fire and electric shock, do
not use the unit near windows.
3. plug must be removed from sock before clea-
ning, servicing, maintenance and move from
one location to another.
4. The fan should be placed on a flat and stable
surface when operating to avoid overturning.
5. The fan should not be placed in a damp
place or where humidity is high (such as in a
bathroom).
6. This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
7. Children should be supervised to ensure that
they do not play with the appliance.
8. If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order to
avoid a hazard.
