Ver. 2.0 - ©Phædrus Audio Ltd. 2015 All rights reserved.
Extended warranty and out-of-warranty services
Various services are available from Phædrus Audio Ltd. These include repair services for equipment once the
warranty period has expired, and the ability to extend the warranty period. These are:
PHILTER-REP
- Repair of a defective PHILTER equaliser, charged at a flat-rate
PHILTER-MISEAJOUR
- Mise à jour for PHILTER*
PHAE-EXTWARR
- Extends standard warranty (see above) by a further year**
* A mise à jour service includes a complete inspection, re-valve (re-tube) and the implementation of any
engineering updates as well as a re-test to performance specification.
**
If extended warranty is ordered after the initial warranty has expired then the intervening period is charged
without exception.
Please contact your dealer or Phædrus Audio Ltd. for current prices.
Warranty service conditions are subject to change without notice. For the latest warranty terms and conditions and additional information
regarding Phædrus Audio Ltd. limited warranty, please see complete details online at
www.phaedrus-audio.com
.
Chapter 3 - Safety
General
Before using any piece of equipment manufactured by Phædrus Audio Ltd., be sure carefully to read the
applicable items of these operating instructions and the safety suggestions. Keep them for future reference.
Follow the warnings indicated on the unit, as well as in the operating instructions.
Selection of PSU
Suitable PSUs for the Phædrus Audio Ltd. products are available as line items from Phædrus Audio.
They are:
PHAE-PSU(110)
- 110V mains plugtop PSU: plug is North American type.
PHAE-PSU(220Euro)
- 220V mains plugtop PSU; plug is European type
PHAE-PSU(220UK)
- 220V mains plugtop PSU; plug is 3 pin 13 AMP, British type
A 12V AC supply is required for the Phædrus Audio PHILTER. A direct current (DC) supply is NOT suitable and will
damage the unit. If a supply is sourced elsewhere than from Phædrus Audio, it must have the following
specifications:
12V AC, 12 Watt supply or greater (> or = 1000mA supply current)
Must be suitable for connection to the appropriate mains voltage
Must be Class-II, double-insulated
Must have 30% regulation or better
Must contain one-shot thermal fuses, resettable fuses, or Polyswitches for over-current protection.
UK and Euro units should comply with
EN 60950-1
and
CE
requirements and
only PSUs with UL and CSA
approvals should be provided on North American units. Units supplied to other countries should be verified to
comply with the relevant standards which obtain in those territories.
