4
radar receiver. Detector cannot be mounted behind any metal part of the car (wiper blade,
metalized windshield, radio antenna etc.). Metal parts can decrease the receiving
performance of your unit. Detector should be mounted in horizontal position and it should be
parallel with the direction of the road.
Do not mount your detector where it disturbs you in free view of road!
Set up the correct angle of the mount.
The detector cannot be mounted behind any metal part of the car (wiper blade, metalized
windshield, radio antenna, etc.).
Do not place the detector where it can injure you or your passenger in case of an emergency
stop.
Note:
Do not leave the detector in visible place when you leave your car in a park place. This keeps
the detector out of sight from thieves and prevents the unit from the strong sunshine. You
can set the correct angle of the windshield mount with bending of the metal part of the holder.
Removal of the unit is easier if you lift it with your hand while pulling it back.
ATTENTION: SOME NEWER CAR HAS A SPECIAL PLASTIC FILM INNER SIDE OF THE WINDSHIELD. SUCTION CUPS CAN
DAMAGE THIS SPECIAL FILM! BE CAREFUL! BEFORE YOU PLACE YOUR DETECTOR ON THE WINDSHIELD FIRST TIME,
PLEASE CHECK THE USER’S GUIDE OF YOUR CAR.
2)
POSSIBILITIES FOR FIXING YOUR DETECTOR
Windshield
Fix your mount on the windshield.
Set up the correct angle of the mount.
Connect your power cord into the detector.
Place the detector onto the windshield mount.
Connect the power cord into cigarette lighter socket.
Dashboard
Remove the protective paper from one side of the double sided velcro tape.
Put the unprotected side of the velcro tape to the bottom side of your detector.
Remove the protective paper from the other side of the velcro tape.
Place the detector on the dashboard.
Connect your power cord into the detector.
Connect the power cord into cigarette lighter socket.
