To create SMS instructions to alarm host through the mobile phone, then to remote control the
host, make host enter into Arm or Disarm state; Also can open or close the Siren.
Detailed SMS instructions as follows:
Host Arm SMS instruction: Edit SMS “1” and send it to the SIM number of host with your
mobile phone, If you get back the message "Armed" from the
host which means the host has entered into Arm state.
Host Disarm SMS instruction: Edit SMS “2” and send it to the SIM number of host with
your mobile phone, If you get back the message "Disarmed"
from the host which means the host has entered into Disarm
state.
Open Siren SMS instruction: Edit SMS “6” and send it to the SIM number of host with
your mobile phone, If you get back the message "Siren On"
from the host which means the siren has sounded already.
Close Siren SMS instruction: Edit SMS “5” and send it to the SIM number of host with
your mobile phone, If you get back the message "Siren Off"
from the host which means the siren has been closed already.
5
.
Remote Control by SMS
Remotes Operation: Press [ ]button.
Host Operation: Press[ ]
button
SMS operation: Edit SMS “2” and send it to the SIM number of host with your mobile phone.
Disarm means to make the alarming host into non-alert state. One is, to Disarm the host from
Arm state; the other is, to stop the alarm when the host is making alarms. After disarming, even
if you trigger the detector, the host would not sound alarm (excluding 24- hour defense areas).
If keypad lock is closed, press [ ]keypad directly to disarm. If keypad lock is open, press
[ ], and follow voice prompt enter [user password, finally press [#] to confirm. [Out home] or
[Home] signal light is off. Disarming operation is completed.
3
.
Disarm
LCD display
：
Note:
Please press # to stop the calling of alarm.
-33-
-34-
GSM anti-theft alarm controller
GSM anti-theft alarm controller
When the host make alarms, siren releases voice prompt at once. First, it would send out
SMS, telling user which defense zone has alert, then it will dial the preset numbers to make
voice alarm. If no one answers the call, the system will call the next user number automatically.
The system will call each preset numbers for 3 times in order.
If you answer the call, you will hear the pre-record voice. You can set system to realize
various functions via your telephone or mobile phone keypad.
Hang up: If you hang-up directly without answering the call, system will call each preset
number circularly.
Press [*]: Play the recording.
Press [1]: The host stops alarming and to Arm; it stops calling users.
Press [2]: The host stops alarming and to Disarm; it stops calling users.
Press [3]: The host closes siren and monitors the scene for 30 seconds, for continuous
monitoring, press [3] again to monitor the abnormal sounds or a burglar intrusion
for another 30 seconds.
Press [4]: start talk-back 30s.
4. Answer Alarm Call
The telephone (mobile) is connected to alarm host number, and after setting of ringing times,
the telephone receiver prompts computer-generated voice: “Please enter password”. The
password is entered via telephone (mobile). For wrong password, the host gives prompt:
“wrong password, please enter password again”. For correct password, the telephone receiver
prompts “press
①
to arm, press
②
to disarm, press
③
to monitor, press
④
to talk ”. And after
getting access of remote control, phone button could be used for remote control.
Press [*]: play the recording.
Press [1]: the host stops alarm and enter into Arm state
Press [2]: the host stops alarm and enter into Disarm state
Press [3]: the host closes the siren, enter into monitoring state for 30 seconds and press
[3] for another 30 seconds to monitor the abnormal sounds or a burglar
intrusion in case of continuous monitoring.
Press [4]: start talk-back 30s.
6
.
Remotely Control
Some special cases occur in the family: sudden illness for the elderly or children results in
first aid; in case of sudden fire, help is needed; in case of housebreaking, the alarm is required;
So please just press the host keypad “Emergency Alarm[SOS]” ,remote controller key [ SOS ].
Alarm system will immediately sound loudly and automatically call the pre-set
phone
number.
7
.
SOS
Notes:
Please press “ #” to stop the calling of alarm.
Remotes operation: press [SOS]button
Host operation: press [SOS] button on keypad
