13
VERY IMPORTANT: ALWAYS INSPECT THE HOSE PRIOR TO EACH USE.
BEFORE LIGHTING:
Inspect the gas supply hose before turning the gas “ON”. If there is evidence
of cuts, wear, melted hose or abrasion, it must be replaced before use. The
replacement hose assembly must be that specified by the manufacturer.
VERY IMPORTANT: TO LIGHT MAIN BURNERS OF THE GRILL:
1) Read instructions before lighting.
2) Turn all knobs to “OFF” then open the LP tank valve. Always keep your face
and body as far from the grill as possible when lighting.
3)
Open lid during lighting. Do on lean over grill while lighting.
4) Push and turn any control knob slowly to “HI” position. The built-in igniter will
click and spark simultaneously to light the pilot and burner in sequence. If
burner fails to light within 5 seconds, turn the control knob to “OFF”
IMMEDIATELY. Wait 5 minutes for gas to dispel, then repeat the lighting
procedure. Once one burner is lit, light remaining burner with same process.
5) Follow match lighting instructions if burner can’t be lit after repeating 3-4 times.
TO LIGHT THE MAIN AND SIDE BURNERS BY MATCH: (AS THE
FOLLOWING FIGURE SHOWS)
If the burner will not light after several attempts then the burner can be match lit.
Tools: Lighting rod (hanging behind the right door)
GRILL LIGHTING INSTRUCTIONS
