ASSEMBLY INSTRUCTIONS
5
6
7
8
Further Instruction on Assembly of Side Burner Kit:
If you have any questions on this assembly, do not hesitate to call your dealer of AEI
Corporation.
Before operating side burner, be certain that all gas connections are tested for leaks.
DO NOT OPERATE IF LEAK IS PRESENT. Follow leak testing and correction
procedure on page 11.
NEVER allow more than 10 pounds to be on the side burner assembly as additional
weight could make entire grill less stable. Please note, a gallon of water weighs 7
pounds.
6
Reuse screws
removed in step #3
Attach wire with red
ignitor sleeve to
ignitor on valve, be
sure it is attached
to burner
Reattach burner to bracket
“A” using screws f/step 4
Reattach control
knob using set
screw and Allen
Wrench.
