
HANDLE-BAR CONTROLS
1. HI/LO BEAM SWITCH
HI-The high beam is on
LO-The low beam is on
Press the lower part to make a passing signal.
2. Turn Signal Switch
Move to
←
to signal a left turn,
→
to signal a
right turn.
Press to turn signal off.
3. Horn Button
When the horn button is pressed, the horn will
sound.
4. ENGINE RUN/OFF Switch
Press lower part to stop the engine, and press
upper part to run the engine .
5. HEADLIGHT Switch
ON-Headlight, position light, taillight and meter
light will be on, when the engine is running.
6. STARTER BUTTON
The starter button is below the headlight switch .
When the starter button is pressed, the starter
motor cranks the engine.
~13~
1
2
3
4
5
6