PG DRIVE TECHNOLOGY NEWVSI, Technical Manual

Page: 9 / 68

PG D
RIVES
T
ECHNOLOGY NEW
VSI T
ECHNICAL
M
ANUAL
– O
PERATION
SK80151-1 9
1 Introduction
The relevant contents of this chapter should be included in the wheelchair operating guide. Further copies are available from
PGDT in either written or disk (Adobe PDF) format. Copies should not be made without the express permission of PG Drives
Technology.
The operation of the newVSI varies dependent on programming. This chapter covers all types of operation. It is the responsibility
of the wheelchair manufacturer to ensure that only the relevant sections of this chapter are included in the wheelchair’s
operating manual.
The operation of the newVSI wheelchair controller is simple and easy to understand. The controller incorporates state-of-the-art
electronics, the result of many years of research, to provide you with ease of use and a very high level of safety. In common with
other electronic equipment, correct handling and operation of the unit will ensure maximum reliability.
Please read this chapter carefully - it will help you to keep your wheelchair reliable and safe.
2 General
2.1 Handling
Avoid knocking your controller and especially the joystick. Be careful not to strike obstacles with the controller or joystick when you
drive. Never drop the controller.
When transporting your wheelchair, make sure that the controller is well protected. Avoid damage to cables.
2.2 Operating Conditions
Your controller uses industrial-grade components throughout, ensuring reliable operation in a wide range of conditions. However,
you will improve the reliability of the controller if you keep exposure to extreme conditions to a minimum.
Do not expose your controller or its components to damp for prolonged periods. If the controller becomes contaminated with
food or drink clean it off as soon as possible.
2.3 Cleaning
Clean the controller and the joystick with a cloth dampened with diluted detergent. Be careful when cleaning the joystick.
Never use abrasive or spirit-based cleaners.
Do not operate the controller if the vehicle behaves erratically, or shows abnormal signs of
heating, sparks or smoke. Turn the controller off at once and consult a local service agent. PGDT
accepts no liability for losses of any kind arising from failure to comply with this condition.
2.4 Heat Shield
The newVSi is built with an integrated heat shield. The purpose of the heat shield is to protect the wheehchair user
from exposure to metal parts of the controller. Should the heatshield become damaged it should be replaced
immediately. Contact the Wheelchair manufacturer for furter details.
On no account should the wheelchair be operated if the heat shield is damaged or removed. PGDT
accepts no liability for losses of any kind arising from failure to comply with this condition.