GSPublisherVersion 183.1.8.100
STEP 5
STEP 6
I) Separate the yellow plug from the nail in anchor and, using a rubber mallet, gently knock in the
plug into the holes drilled in Step 5.
II) Place the APC 1 wall plates on the wall. Align the oval holes on the wall plate with the plugs.
III) Screw the nail in anchor into the yellow plug.
6
The broken lines indicate the outer boundaries of the wall cabinet. Mark the drill points on the wall
with respect to the hanging position of the wall cabinet. Refer to Det. 5 for dimensions. Then, using
an 8mm Drill Bit, drill 80mm deep holes through the marked positions on the wall ensuring that the
drill bit is perpendicular to the wall surface.
32mm
I
II
III
Det. 6
38mm
18mm
38mm
32mm
Det. 5
18mm
WALL
WALL
