GSPublisherVersion 241.1.7.100
20
STEP 9
STEP 10
X 2
U,V
DF
DB
DR
DL
DP
Screw 3.5 x 16mm
U
W
D
A
DB
DL
DR
DP
V
DL
B
Insert the Drawer Boxes as shown. Push the drawers all-in ensuring that the locking devices snap
into the Tandem Single Extension runners and that the hook at the rear end of the runners enters
the holes at the back of panels DB. If the holes are too small for the hook, expand them using a
6mm drill bit. Ensure that panels U & V go in the shown positions.
Using Screw 3.5 x 16mm, screw in the handles onto panels
U & V
in the shown position. Confirm
that the holes on the handles align with the pilot holes on panels
U & V
.
