GSPublisherVersion 241.1.7.100
13
STEP 9
STEP 10
Using Screw 3.5 x 16mm, screw in the handles onto panel
W
in the shown position. Confirm that the
holes on the handles align with the pilot holes on panel
W
.
X 2
W
S
R
Q
P
T
Screw 3.5 x 16mm
Insert the Drawer Box as shown. Push the drawer all-in ensuring that the locking devices snap into
the Tandem Single Extension runners and that the hook at the rear end of the runners enters the
holes at the back of panel R. If the holes are too small for the hook, expand them using a 6mm drill
bit.
D
W
A
B
C
E
