First Time Operation Via Menu:
Before you start using this unit, please check there is no transportation damage, should there be any, please
do not use the device and contact your dealer immediately.
The Stage Mist 800 is designed to be used with water based haze liquid. NEVER OIL BASED.
Put the Hazer on a flat stable surface. Make sure no one can put any body part close to the heater output.
Unscrew the lid on the fluid bottle, fill up with a suitable haze liquid, take care to not over fill. Then screw the
plastic cap back on. Make sure the tank never runs dry during operation.
Connect the Stage Mist 800 to a suitable mains supply.
There is a simple 3 button LCD display on the back of the unit, the 3 buttons control menu, up and down.
When you first turn on the haze machine you will need to wait for around 3 minutes for the heater to warm
up. Then you will get access to the controls.
Press the menu button to scroll through options and use the up down buttons to make changes.
Adjust settings ‘h’ and ‘F’ for output volume and fan speed
First Time Operation Wired Timer Controller:
Before you start using this unit, please check there is no transportation damage, should there be any, please
do not use the device and contact your dealer immediately.
The Stage Mist 800 is designed to be used with water based haze liquid. NEVER OIL BASED.
Put the Hazer on a flat stable surface. Make sure no one can put any body part close to the heater output.
Unscrew the lid on the fluid bottle, fill up with a suitable haze liquid, take care to not over fill. Then screw the
plastic cap back on. Make sure the tank never runs dry during operation.
Connect the wired remote control.
Connect the Stage Mist 800 to a suitable mains supply.
Allow to warm up for about 3 minutes.
Fan speed ‘f’ and Haze output ‘h’ must be set to zero in the menu for the remote to work.
The ready indicator light will light up green when the hazer is ready to use.
DISPLAY
FUNCTION
d001-d512 DMX Address
h 0-5
Output Volume 0=off, 1=Low,
3=High
F 0-5
Fan Speed 1=Slow, 5=Fast
FLASH
Shows when liquid is low
