____________________________________________________________________________________________________________
PFT G 5 c FU 230
21
Measures at the end of work and when cleaning
01.2005
____________________________________________________________________________________________________________
________________________________________________________________________________________
Knauf PFT GmbH & Co. KG
Telephone
09323 / 31-760
PO Box 60
Telefax
09323 / 31-770
D-97343 Iphofen
Internet
www.pft.de
________________________________________________________________________________________
Close water intake valve
Depressurize the water hose by opening and then carefully disconnecting the water
valve at the side
Disconnect power supply
If the machine is not going to be used for several days, empty the material hopper. To
do so, open the hopper cleaning flap and remove the star wheel, if required.
WARNING!
Prior to dismantling the hopper cleaning flap, the main switch must be turned off / the
power supply must be disconnected.