Mixing pump G 4 X FU 230/400V / Part 2 Overview, operation and service
Operation
5.8.1
In case of longer interruption of work / break
NOTE
Always observe the setting time of the material to be
processed:
Clean the system and mortar hoses depending on the
setting time of the material and the length of the interrup-
tion (pay attention to outside temperature).
The guidelines of the material manufacturers have to be
observed regarding breaks.
1
Figure 64: Closing the air tap
1. Close the air tap (1) if the work is interrupted for an extended
period of time.
2
Figure 65: Switching off the machine
2. Turn the pump motor selector switch (2) to the "0" position.
5.9
Switching off the air compressor
1
Figure 66: Switching off the air
compressor
1. Switch off the air compressor using the green toggle switch (1).
2. Open air tap on the spray gun so that the residual pressure can
escape.
WARNING
Danger of injury from discharged mortar!
Discharged mortar may lead to injuries to eyes and face.
Beware of residual pressure.
page 48 / 80
Summary of Contents for 00260621
Page 77: ...Mixing pump G 4 X FU 230 400V Part 2 Overview operation and service Disposal page 77 80...
Page 78: ...Mixing pump G 4 X FU 230 400V Part 2 Overview operation and service Disposal page 78 80...
Page 79: ...Mixing pump G 4 X FU 230 400V Part 2 Overview operation and service Disposal page 79 80...
