Mixing pump G 4 X FU 230/400V / Part 2 Overview, operation and service
Operation
5.3.1
Risk of injury from running star wheel
1
Figure 28: Grille cover
WARNING
Running star wheel!
Risk of injury when reaching into the running star wheel.
During machine preparation and operation the grille
cover (1) must not be removed.
Never reach into the running machine.
5.3.2
Positioning machine
Figure 29: Lockable castor
1. Lock the lockable castor prior to operating the machine.
2. Put up the machine on a stable, even surface and secure against
unwanted movements:
Do not tilt or roll the machine away.
Place the machine where it cannot be hit by any falling objects.
The controls must be freely accessible.
Maintain a clearance of approx. 1.5 metres around the machine.
5.3.3
Connecting the power supply
5.3.3.1 Connecting the power supply 230V
2
1
Figure 30: Changing voltage
Changing voltage
1. Open the control cabinet door.
2. Switch the voltage changeover switch (1) to the left to 230V.
3. Turn the potentiometer (2) for the motor speed or for the material
quantity to level 10.
4. Close the control cabinet door again.
page 33 / 80
Summary of Contents for 00260621
Page 77: ...Mixing pump G 4 X FU 230 400V Part 2 Overview operation and service Disposal page 77 80...
Page 78: ...Mixing pump G 4 X FU 230 400V Part 2 Overview operation and service Disposal page 78 80...
Page 79: ...Mixing pump G 4 X FU 230 400V Part 2 Overview operation and service Disposal page 79 80...
