Mixing pump RITMO L / RITMO M Overview - Operation
Transport, packing and storage
2016-02-17
29
22.4 Transport in individual parts
1
Fig. 31: Open the
turning bolt
Fig. 32: Spare parts
1. Take the machine apart for easier transport.
2. The units mixing tube with material container and pump,
gear motor with tilt flange and undercarriage.
3. Loosen lever and hose connections. Open turning bolt (1)
(Fig. 31).
4. Remove mixing tube with material container from
undercarriage.
22.5 Transport with passenger car
Fig. 33: Transport
DANGER!
Danger of injury by unsecured loads!
In case of road transport, all persons involved in
the loading process are responsible for the proper
securing of the load. The responsible driver is
responsible for the operational loading.
22.6 Transport of already running machine
DANGER!
Risk of injury from discharged mortar!
Injuries to face and eyes can occur.
Therefore:
Before opening the couplings ensure that there is
no more pressure on the hoses (observe display
at mortar pressure gauge).
1. Carry out the following steps before beginning the transport:
2. First unplug the mains cable.
3. Unplug all other cable connections.
4. Remove water supply line.
5. Start transport.
6. Remove loose parts during crane transport.
