PFT 00 03 98 68 Operating Manual Download Page 5 | Manualshive

Page: 5 / 60

PFT 00 03 98 68 Operating Manual Download Page 5

PFT ROTOQUIRL II/ PFT ROTOMIXSafety - Overview - Operation - Spare parts lists

General information

2016-08-26

5

1 General information

1.1 Information regarding the operating manual

This operating manual gives important information on handling the
device. A prerequisite for safe working is the observance of all
stated safety guidelines and instructions.

Furthermore the local accident prevention guidelines and general
safety instructions for the application area of the device are to be
adhered to.

Read the operating manual thoroughly before starting any work! It
is a part of the product and has to be kept near the tool and easily
accessible to the staff at all times.

If the tool is given to third parties, also include the operating
manual.

The figures in this manual are for presentation purposes of facts
not necessarily to scale and may slightly differ from the actual
model of the device.

1.2 Keeping the manual for future reference

The operating manual has to be available during the whole service
life of the product.

1.3 Information regarding the safety instructions

These safety instructions give important information on handling
the device. A prerequisite for safe working is the observance of all
stated safety guidelines and instructions.

Furthermore the local accident prevention guidelines and general
safety instructions for the application area of the device are to be
adhered to.

Read the operating manual thoroughly before starting any work! It
is a part of the product and has to be kept near the tool and easily
accessible to the staff at all times.

If the tool is given to third parties, also include the operating
manual.

The figures in this manual are for presentation purposes of facts
not necessarily to scale and may slightly differ from the actual
model of the device.

«
...
3
4
5
6
7
...
»

Summary of Contents for 00 03 98 68





























































Reviews:

No comments