PFS F19-547 Owners &  Safety Manual Download Page 6

SAFETY WARNINGS

!      

WARNING

Do not operate fire table under a tent, canopy or any type of 

structure that could that could fall on the fire table.

Do not operate the fire table if the regulator has been 

removed.

Use integrated windscreen in windy conditions.

Children and adults should be alerted to the hazards of high 

surface temperatures and should stay away to avoid burns 

or clothing ignition 

Young children should be carefully supervised when they 

are in the area of the appliance

Clothing or other flammable materials should not be hung 

from the appliance or placed on or near the appliance

Gas Requirements

Your Littlefoot Fire Table is not provided with a propane  cylin-

der. Use the following specifications for your propane cylinder:

The 20lb propane gas supply cylinder is constructed and 

marked in accordance with the specifications for propane gas 

cylinders as required by the U.S. Department of Transportation 

(DOT), Specifications for LP-Gas Cylinders, or the Standard 

for Cylinders, Spheres and Tubes for Transportation of Dan-

gerous Goods and Commission, CAN/CSA B339, as applica-

ble.

Cylinder must be provided with a listed overfilling prevention 

device; and a cylinder connection device compatible with the 

connection for the appliance

Supply Pressure Liquid Propane:

Minimum 8” W.C. Maximum 13” W.C.

54,000 btu/hr (15.8 kW), 9” manifold (2.2 kPA), Min inlet pres-

sure 8” (2 kPa), Max inlet 13” (3.2 kPa)

!      

WARNING

Inspect the hose before each use of the appliance.

The hose assembly must be replaced prior to the 

appliance being put into operation if there is evidence 

of excessive abrasion or wear, or if the hose is dam-

aged. Contact Bigfoot Firetable for replacement hose 

assembly.

Inspect the burner before each use of 

appliance.

The burner must be replaced prior to the appliance 

being put into operation if it is evident that the burner 

is damaged. Contact [email protected] for 

replacement burner assembly.

Do not use this appliance if any part has been under 

water. Immediately call a qualified service technician 

to inspect the appliance and to replace any part of 

the control system and any gas control that has been 

under water.

Place the tank in an open area

REMOVE COVER BEFORE IGNITING BURNER

Page 5.

Summary of Contents for F19-547










Reviews: