ENGLISH
ENGLISH
13
15
16
17
12
14 UNIT START UP
Turn on hot and cold water supplies, and check all connections for leaks.
16 SHOWER HEAD INSTALLATION
Thread Hand Shower (
16A
) onto Hose (
16B
).
Make sure Hand Shower (
16A
) is securely tightened to Hose(
16B
).
15 FINAL FLUSHING
For final flushing, turn valve on and allow water to run through the Tub Spout
(
15A
) for several minutes. Pull Spout Knob (
15B
) up to allow water to run
through Shower Hose (
15C
). Allow water to run for several minutes until all
foreign matter clears the line.
13 TUB SPOUT FUNCTION
When the valve is turned on, water normally flows through the Tub Spout
(
13A
).To activate the shower, turn valve on and pull the Knob (
13B
) up. Hold
on until water flows continuously from the shower arm.
17 HAND SHOWER FUNCTION
To adjust spray, turn outer shell (
17A
) using switch (17B) to a desired spray
pattern.
12 VALVE FUNCTION
By rotating the Lever Handle (
12A
) slightly counterclockwise, the valve will
be fully activated to the “COLD” position. The water temperature can be in-
creased by continuing to rotate the Lever Handle (
12A
) in a counterclockwise
direction.
4
UP
For
Shower
13A
13B
15A
15B
15C
16A
16B
17A
FULL
HOT
FULL
COLD
CLOSED
OPEN
12A
17B
