ENGLISH
ENGLISH
7
8
9
10
7 CONTROL BODY INSTALLATION
Apply plumber’s putty into groove on bottom of Gasket (
7A
) per manufacturer’s
recommendations. Place Gasket (
7A
) under base of Control Body (
7B
). From above
sink, insert Threaded Shank (
7C
) and Flexible Tubing (
7D
) through side hole of sink.
8 SECURING CONTROL BODY
From underneath sink, place Washer (
8A
), and Locknut (
8B
) onto Mounting Shank (
8C
).
Make sure Handle (
8D
) is facing forward and it swings equally in both directions. Tighten
Locknut (
8B
) firmly to Shank (
8C
).
Caution:
Do not over tighten!
9 HOSE GUIDE & SOAP DISPENSER GUIDE INSTALLATION
Insert Hose Guide Shank (
9A
) through Flange Gasket (
9B
) and insert Soap Dispenser
Guide Shank (
9C
) through Foam Gasket (
9D
) and into the sink holes. If desired, place
a small bead of plumber’s putty to the underside of Flanges (
9A & 9C
).
(Both Hose Guide
and Soap Dispenser Guide can be placed in either hole).
10 SECURING HOSE GUIDE & SOAP DISPENSER GUIDE
From underneath sink, secure Hose Guide (
10A
) and Soap Dispenser Guide (
10B
) by
screwing Plastic Locknuts (
10C
) and (
10D
). Thread on Bottle (
10E
) to Soap Dispenser
Shank (
10F
). Hand tighten.
Caution:
do not over tighten!
3
7C
7B
7A
7D
8B
8C
8D
8A
10C
10A
10B
10D
10E
9C
9A
9B
9D
10F
Summary of Contents for Marielle LF-026-3N
Page 17: ...FRANÇAIS FRANÇAIS 17 ...
