Low Flow in
Unfiltered Mode
Water slowly
dispensing
Cloudy water
or air bubbles
Chlorine
Taste & Odor
Leaky
Fittings
Water not
dispensing
Water containing
tiny black particles
Turn on the filtered water faucet
and allow to run for 11 gallons (or
approx. 10 minutes) to flush out
any harmless carbon fines present.
New filter canisters contain
activated carbon.
Will go away after water runs
for a while.
Air in system after installation.
Replace the filter canisters.
The filter canisters are no longer
reducing chlorine tasteand odor
from the water supply.
A six-month change-out period is
recommended. Replace both filter
canisters • High sediment levels
can cause premature clogging.
The filters have been installed
for too long. The filter canisters
have become clogged.
Fully follow the installation
instructions and be sure the tubing
is free of nicks, burrs, etc , and is
installed to the proper depth.
Tubing may not be installed
properly.
Fully follow the filter replacement
instructions.
Filter canisters not fully installed.
Remove and clean the aerator.
Flush your faucet for 15 seconds.
Re-install the aerator.
If you are experiencing low flow
from your faucet while in
unfiltered mode your aerator
may be clogged
Troubleshooting
Problems
Possible
Causes
What
To Do...
GE FIlters
Clarify Faucet
General Care & Maintenance
