Operating Instructions
Contador
Page 24 of 40
Revision 6
© 2019 – Pfeuffer GmbH
Luminous fields
This lamp is active, if
the remote control of the instrument via RS232-interface or
special interface is carried out. Operation via the keyboard is
then blocked.
the CONTAFILL semi-automatic filling station is connected.
This lamp is active, if
the feed container or drawer is missing.
there is no bag in front of the electronical sensor (in connection
with the CONTAFILL semi-automatic filling station).
The count start is then blocked.
7.3
Filling the sample
After the CONTADOR is switched on via the main switch position
I
, the counting menu starts.
Place the desired feed container on the CONTADOR.
Make sure the area is clean.
The CONTADOR automatically detects the feed container. Refer to
chapter 7.4
for selecting the container
.
Insert the drawer.
Fill the desired seed / product in the feed container.
Adjust the slider according to the grain size.
7.4
Selecting the feed container
The positioned feed container is detected automatically. The bottom of the containers are provided
with magnets which are used to detect the container number, and the associated parameters for the
light barrier and feed are selected automatically.
You can choose from three different feed containers:
Figure 20: Feed container
Item Designation
1
Container no. 1 for rape, seeds and fine seeds
2
Container no. 2 for grain, sunflower seeds and rye
3
Container no. 3 for maize, beans and peas
