10
Installation
Connecting the trans-
mitter to the level
converter TIC 002
Fig. 6:
Connections diagram transmitter - TIC 002
Set address selector switch S on the transmitter to RS-485 mode with the relevant ad-
dress.
Connect the transmitter to the TIC 002 using the connection cable.
Connect the power supply to the TIC 002.
Connecting the trans-
mitter to the USB/RS-
485 converter
Fig. 7:
Connections diagram transmitter - USB/RS-485 converter
Set address selector switch S on the transmitter to RS-485 mode with the relevant ad-
dress.
Connect the transmitter to the USB/RS-485 converter using the connection cable.
Connect the transmitter to the power supply.
5.3 Removal of components for their maintenance
Switch off the power supply on the control unit/power supply or disconnect the equip-
ment from the mains supply.
Loosen any connection cables.
Detach the transmitter from the vacuum apparatus.
Close the flange opening by using the original protective cover.
24 V DC
TIC 002
RS-232
RS-485
PC
Transmitter
Vacuum
chamber
USB/RS485-
converter
24 V DC
Mod.:
Mod.-Nr.:
Input:
Output.
Masse:
Ser.-Nr.: 42000303
RPT 100
PT.........
.....V, 50/60Hz ..VA
.....V, 0.2 A
.....kg
D-35614 Asslar
Mod.:
Mod.-Nr.:
Input:
Output.
Masse:
Ser.-Nr.: 42000303
RPT 100
PT.........
.....V, 50/60Hz ..VA
.....V, 0.2 A
.....kg
D-35614 Asslar
Vacuum
chamber
Vacuum
chamber
WARNING
Contamination of transmitter parts possible due to the media measured!
Poisoning hazard through contact with harmful substances.
In the case of contamination, carry out appropriate safety precautions in order to pre-
vent danger to health through dangerous substances.
Decontaminate affected parts before carrying out maintenance work.
