Pfeiffer Chemie-Armaturenbau GmbH
Hooghe Weg 41 • 47906 Kempen
Phone 02152 2005-0 • Fax 02152 1580
Page 1 of 8
Operating instructions
BA 28y-01_EN
Edition June 2004
Declaration of Conformity as per Directive
97/23/EC
and Manufacturer’s Declaration as per Directive 98/37/EC
The manufacturer
Pfeiffer Chemie-Armaturenbau GmbH, 47906 Kempen, Germany
declares that:
Piggable ball valves Series 28y and piggable end stations Series 28z,
with packing
•
with pneumatic/electric/hydraulic actuator
•
with free shaft end for subsequent mounting of an actuator
1. The valves are pressure accessories within the meaning of the Pressure Equipment Directive
97/23/EC and conform with the requirements of this Directive,
2. The valves are not complete machinery within the meaning of the Machinery Directive
98/37/EC, but meet the relevant requirements of this Directive,
3. They may only be operated observing the operating instructions <
BA28y-01_EN
> delivered
together with the valve.
The commissioning of these valves is only permitted after the valve has been installed from both sides in
the pipeline and a risk of injury can be ruled out.
(For piggable ball valves which are intended for dead-end service, see section 2.3).
Applied standards:
AD 2000 Regulations
DIN-EN 292-2000
Regulations for pressurized valve body parts
Safety of Machinery,
Part 2: Technical requirements
Type designation and technical features:
Pfeiffer data sheets
<
TB28y_EN
and
TB28z_EN
>
NOTE: This Manufacturer’s Declaration applies to all valve types listed in this catalog.
Applied conformity assessment procedure:
Conforming to Annex II of the Pressure Equipment Directive 97/23/EC, Module H
Name of notified body:
Identification number of the notified body:
TÜV Anlagentechnik GmbH
Am Grauen Stein
51101 Köln
Germany
0035
These Declarations become invalid when modifications are made to the piggable ball valves and/or
assemblies that affect the technical data of the piggable ball valve or the <Intended use> described in
section 1 of the operating instructions, and considerably change the valve or an assembly delivered with it.
Kempen, 1. June 2004
Lorenz Stolzenberg, Managing Director
These Declaration of Conformity and operating instructions have been generated electronically and are legally binding without signature
